🎉 Apresentando o novo recurso da Comunidade 🎉 Votos!

Encontrou a solução para o seu problema em uma resposta ou Dica de usuário? Então, dê um voto positivo! Seus votos auxiliam outras pessoas. Saiba mais sobre quando votar positivo: Vote na Comunidade de Suporte da Apple.

Parece que já faz um tempo que ninguém responde. Para continuar a conversa, faça uma nova pergunta.

Erro 301028 Apple TV 4k

Recetei e Atualizei minha Apple TV 4K para a versão 17.1 e aí não configura mais, já tentei de todas as formas mas não dá certo, com cabo internet com Wi-Fi e nada, alguém tem alguma sugestão ?

Publicado em 26/10/2023 21:51

Responder
2 respostas

26/10/2023 23:46 em resposta a Marcospaco

Olá Usuario(a),

Aqui é a comunidade Apple de usuários ajudando outros usuários iguais a você.


Apple TV 4k Error Code 301028 - Apple Community

For help with connecting an apple TV to your Wi-Fi network, test the steps below found in the article here: If your Apple TV can't connect to Wi-Fi


"If your Apple TV can't connect to Wi-Fi


1.Check that everything is on, connected, and in range

Make sure that that your internet router is connected to your modem and that both are powered on. If your router and modem are combined, make sure that the device is powered on. 

If possible, keep your Apple TV and Wi-Fi router in the same room, but don't place your Apple TV directly on or within a foot of your router. Try to avoid physical obstructions in the path of your wireless signal, especially metal surfaces. If your Apple TV has an Ethernet port, connect your Apple TV directly to the modem with an Ethernet cable for the best experience.

 

2.Restart your Apple TV, router, and modem

After you restart each device, see if you still need help.

On the Apple TV menu, go to Settings > System and select Restart.

Unplug your router and your cable or DSL modem from power. Then plug them back in.

  

3.Use an Ethernet cable and check for software updates

If your Apple TV has an Ethernet port, try connecting your Apple TV directly to your router, or cable or DSL modem using an Ethernet cable. Apple TV connects to internet with either Wi-Fi or Ethernet. When you use an Ethernet cable, Apple TV automatically uses that connection instead of your Wi-Fi network. 

Join your network and check for software updates. Go to Settings > System > Software Updates. If there's an update, install it. Then unplug your Ethernet cable and try to join your Wi-Fi network again."



If the issue continues and as this only occurs with one of your devices, reach out to Apple Support directly to further assist.


Contact Apple Support


Contact Apple for support and service


Best.


Espero ter ajudado!

Atenciosamente

Dav3 G®️0hl666



Erro 301028 Apple TV 4k

Bem-vindo à Comunidade de Suporte da Apple
Um fórum onde os clientes da Apple ajudam uns aos outros com seus produtos. Use o seu ID Apple para começar.